BPC-157 & TB-500 “Wolverine” Blend

Researchers looking to source BPC-157 & TB-500 “Wolverine” Blend in the United States usually need three things at once: verified purity, a documented third-party certificate of analysis and a vial that arrives intact. Protide Health Lab provides BPC-157 & TB-500 “Wolverine” Blend as a sterile-filtered lyophilised powder in sealed vials, each supported by a third-party HPLC-MS purity report and a certificate of analysis that is tied to the specific batch you receive.

The BPC-157 and TB-500 blend combines two of the most studied repair-associated peptides in a single vial. BPC-157 is a 15-amino-acid gastric-juice-derived sequence with reported cytoprotective and angiomodulatory activity, while TB-500 is the active fragment of thymosin beta-4, an actin-sequestering protein that regulates cytoskeletal dynamics and cell migration. Researchers often choose the combination when a study design calls for both an angiogenic and a cytoskeletal-mobility stimulus in the same preparation. Lyophilisation extends shelf life and reduces the risk of hydrolysis during transit, which is why essentially all research peptides are distributed as a dry powder rather than as a pre-dissolved solution.

BPC-157 & TB-500 “Wolverine” Blend Key Takeaways

• Compound class: dual-peptide blend of BPC-157 and thymosin beta-4 fragment (TB-500).
• Format: lyophilised research powder in a sealed glass vial.
• Vial sizes: 10/10mg, 30/30mg.
• Purity: 99% (HPLC-MS verified, third-party tested).
• Price range: $145 to $305 per vial.
• Fulfilment: domestic US shipping with a batch certificate of analysis.
• Status: for laboratory research use only; not for human or veterinary use.

Table of Contents

1. What Is BPC-157 & TB-500 “Wolverine” Blend?
2. BPC-157 & TB-500 “Wolverine” Blend Specifications
3. Research Overview
4. Reported Mechanism of Action
5. Purity, Testing and Certificates of Analysis
6. Handling, Storage and Reconstitution
7. Available Sizes and Pricing
8. How to Order BPC-157 & TB-500 “Wolverine” Blend Online
9. Frequently Asked Questions
10. Related Research Peptides
11. References and Further Reading

What Is BPC-157 & TB-500 “Wolverine” Blend?

You can obtain BPC-157 & TB-500 “Wolverine” Blend from Protide Health Lab as a dual-peptide blend of BPC-157 and thymosin beta-4 fragment (TB-500) supplied in a sealed, batch-labelled vial. Each vial carries a certificate of analysis from an independent laboratory, and the material is screened for identity by mass spectrometry and for purity by high-performance liquid chromatography before it is released for sale.

Also known as: Wolverine Blend, BPC-157 TB-500 blend, Wolverine peptide, BPC-157 and TB-500.

Protide Health Lab publishes the analytical result rather than an efficacy claim. Before you design a study around BPC-157 & TB-500 “Wolverine” Blend, review the certificate of analysis for the batch in question and confirm that the reported purity and the identity confirmation meet the acceptance criteria your protocol requires.

BPC-157 & TB-500 “Wolverine” Blend Specifications

Property	Details
Product Contents	BPC-157 & TB-500 Blend – Lyophilized Powder (99% purity) in 3mL vial.
Available Sizes	10mg/10mg, 30mg/30mg (BPC-157/TB-500)
Peptide Type	Synthetic pentadecapeptide (15 amino acids) + synthetic N-acetylated 43-amino acid thymosin beta-4 peptide blend
Purity	99% (HPLC-MS verified, third-party tested)
Molecular Formula	BPC-157: C 62 H 98 N 16 O 22 | TB-500: C 212 H 350 N 56 O 78 S
Molecular Weight	BPC-157: 1419.56 g/mol | TB-500: 4963.44 g/mol
Sequence	BPC-157: Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val | TB-500: Ac-Ser-Asp-Lys-Pro-Asp-Met-Ala-Glu-Ile-Glu-Lys-Phe-Asp-Lys-Ser-Lys-Leu-Lys-Lys-Thr-Glu-Thr-Gln-Glu-Lys-Asn-Pro-Leu-Pro-Ser-Lys-Glu-Thr-Ile-Glu-Gln-Glu-Lys-Gln-Ala-Gly-Glu-Ser
CAS Number	BPC-157: 137525-51-0 | TB-500: 77591-33-4
CID	BPC-157: 9941957 | TB-500: 16132341
Synonyms	BPC-157 / TB-500 Blend, Body Protection Compound 157 / Thymosin Beta-4, Wolverine Blend
Appearance	White to off-white lyophilized powder
Storage	Store at ≤6°C, sealed, away from heat, light, and moisture.
Solubility	Soluble in water

These parameters describe the compound as it is released from storage. Where two different values appear for the same property – as with multi-component blends – the individual values apply to each constituent peptide, and the total vial content is given under available sizes.

Research Overview: Soft tissue and connective tissue repair research

BPC-157 & TB-500 “Wolverine” Blend appears in the scientific literature as a dual-peptide blend of BPC-157 and thymosin beta-4 fragment (TB-500) used in controlled laboratory investigation. The summaries below are drawn from published research and describe areas of study rather than any approved or intended use. When researchers search for buy bpc 157 tb 500 blend online, the practical comparison points are the analytical method used, the batch number behind the certificate of analysis and the storage history of the vial, not the marketing copy.

Soft tissue and connective tissue repair research

In Soft tissue and connective tissue repair research, published work typically examines BPC-157 & TB-500 “Wolverine” Blend from the perspective of receptor occupancy and downstream second-messenger activity. Because these endpoints are measured in controlled culture systems, results are usually reported against a vehicle control and a reference compound, which allows the contribution of the peptide itself to be separated from assay variability. Reproducibility in this line of work depends heavily on the consistency of the starting material across repeats.

Angiogenesis and endothelial cell models

Research interest in Angiogenesis and endothelial cell models centres on how BPC-157 & TB-500 “Wolverine” Blend behaves at the level of gene-expression shifts and protein-level endpoints. Reported findings in this area are most useful when the preparation is fully characterised, since an unquantified purity difference between batches can easily be mistaken for a biological effect. For a laboratory working in this field, the practical requirement is a peptide whose sequence identity and purity have been independently confirmed.

Cell migration and cytoskeletal dynamics

Within Cell migration and cytoskeletal dynamics, investigators use BPC-157 & TB-500 “Wolverine” Blend to probe enzyme kinetics and substrate handling. The literature in this area is not uniform: study designs differ in concentration range, exposure time and model system, so comparisons across papers should be made with attention to those parameters. This is one of the clearest reasons to insist on batch-level analytical documentation before designing an experiment.

Actin-sequestration and matrix remodelling

Studies grouped under Actin-sequestration and matrix remodelling generally treat BPC-157 & TB-500 “Wolverine” Blend as a tool for examining cell-migration, proliferation and viability measurements. Endpoints here are typically quantitative – fluorescence, luminescence, chromatographic signal or imaging counts – which makes reproducible material quality a practical requirement rather than a formality. Reproducibility in this line of work depends heavily on the consistency of the starting material across repeats.

Inflammation-resolution endpoints

In Inflammation-resolution endpoints, published work typically examines BPC-157 & TB-500 “Wolverine” Blend from the perspective of signalling cross-talk between converging pathways. Because these endpoints are measured in controlled culture systems, results are usually reported against a vehicle control and a reference compound, which allows the contribution of the peptide itself to be separated from assay variability. For a laboratory working in this field, the practical requirement is a peptide whose sequence identity and purity have been independently confirmed.

Wound-healing model systems

Research interest in Wound-healing model systems centres on how BPC-157 & TB-500 “Wolverine” Blend behaves at the level of dose-dependent changes in cellular readouts. Reported findings in this area are most useful when the preparation is fully characterised, since an unquantified purity difference between batches can easily be mistaken for a biological effect. This is one of the clearest reasons to insist on batch-level analytical documentation before designing an experiment.

Reported Mechanism of Action

The two components act on complementary pathways. BPC-157 signalling is associated with VEGFR2 activation and the nitric oxide system, supporting endothelial cell behaviour and new vessel formation. TB-500 contributes the actin-binding motif of thymosin beta-4, which is linked to cell migration, extracellular matrix reorganisation and anti-inflammatory effects at injury sites. Together they are studied as a combined model system for tissue-repair signalling.

Because BPC-157 & TB-500 “Wolverine” Blend is studied as a dual-peptide blend of BPC-157 and thymosin beta-4 fragment (TB-500), reported mechanisms are generally described at the level of receptor engagement, second-messenger generation and downstream gene or enzyme activity. Reproducing any of those observations depends on using material whose identity and purity have been independently confirmed.

Purity, Testing and Certificates of Analysis

Purity is the single most important variable in peptide research because impurities change the effective concentration of the active sequence and can introduce confounding biological activity. Batch documentation includes the HPLC chromatogram, the mass spectrometry identity confirmation and the reported purity percentage, all of which can be archived alongside your experimental records.

Independent analysis of this material reports 99% (HPLC-MS verified, third-party tested). The certificate of analysis records the method used, the chromatographic profile, the mass-spectrometric identity confirmation and the final purity value, and it is issued against the specific batch supplied. That distinction matters: an identity confirmation from mass spectrometry establishes that the principal peak corresponds to the expected molecular mass, while the chromatographic purity figure describes how much of the total peak area that principal peak represents. A third element of quality control, which is not visible on a purity number, is the water and salt content of the lyophilised powder – residual moisture and counter-ion content both change the effective concentration of the peptide when the vial is dissolved. If your protocol requires a specific acceptance threshold, verify it against the certificate of analysis for the batch you receive before beginning work, and file that document with your study records so the material can be traced later.

Handling, Storage and Reconstitution

Storing the lyophilised powder

Lyophilised material is best held at -20 degrees Celsius away from direct light; avoid repeated temperature cycling by keeping only the working aliquot at hand. Once reconstituted, the solution should be refrigerated at 2 to 8 degrees Celsius and used within a defined working window rather than stored indefinitely.

Reconstitution

Bacteriostatic water is the usual starting diluent, and a preserved 0.9% benzyl alcohol solution is a practical alternative when the same vial will be accessed more than once.

To calculate a working concentration, divide the mass of peptide in the vial by the volume of diluent added. A typical preparation for a lyophilised research powder uses 1 to 2 millilitres of diluent per vial, which yields a stock in the low milligram-per-millilitre range. A convenient shorthand is that a 10mg vial dissolved in 2mL of diluent gives a 5mg/mL stock, while the same vial dissolved in 5mL gives 2mg/mL. Add the diluent slowly down the wall of the vial rather than directing the stream onto the powder, swirl gently instead of shaking, and never vortex a peptide solution: mechanical shear and foaming both encourage aggregation.

Laboratory handling practice

Prepare and handle BPC-157 & TB-500 “Wolverine” Blend in an appropriate laboratory environment using clean technique. Work with gloves and eye protection, use dedicated glassware or single-use labware, and label every aliquot with the compound name, concentration, batch number and preparation date. When drawing from a multi-use vial, swab the stopper before and after use and keep the needle small to reduce coreing. Avoid repeated freeze-thaw cycles, because each thaw exposes the peptide to a fresh round of hydrolysis and aggregation; prepare single-use aliquots instead. Dispose of all peptide waste in accordance with your institution’s chemical-waste policy, and record the batch number in your laboratory notebook so that any analytical outlier can be traced back to a specific vial.

Available Sizes and Pricing

Vial size	Price	Availability
10/10mg	$145	In stock
30/30mg	$305	In stock

Larger vial sizes are intended for laboratories that prepare working stocks in bulk or that run long series of repeat experiments, since a single larger vial reduces the number of separate preparations and therefore the batch-to-batch variability introduced by handling. Smaller vials are generally the better choice for dose-ranging studies where several concentrations are compared side by side.

How to Order BPC-157 & TB-500 “Wolverine” Blend Online

Each order ships from domestic inventory with tracking information and the corresponding batch certificate of analysis, so documentation arrives with the material. Browse the full Peptides > Peptide Blends category listing, or compare other compounds in the same family: BPC-157, TB-500 (Thymosin Beta-4) 10mg, TB-500 & BPC-157 & KPV “Coremend” Blend.

Protide Health Lab supplies BPC-157 & TB-500 “Wolverine” Blend from domestic inventory with same-day dispatch for orders received before the daily cut-off. Each order includes the batch-matched certificate of analysis, and shipment tracking is provided so that delivery can be confirmed. Keep the vial closed until it reaches the laboratory, then store it as described in the handling section above.

Frequently Asked Questions

What is BPC-157 & TB-500 “Wolverine” Blend?

The BPC-157 and TB-500 blend combines two of the most studied repair-associated peptides in a single vial It is supplied as a research reagent for in-vitro laboratory investigation, not as a therapeutic product..

What purity is BPC-157 & TB-500 “Wolverine” Blend supplied at?

The material is released against independent analytical testing, with a reported purity of 99% (HPLC-MS verified, third-party tested). The certificate of analysis for your specific batch records the method used, the chromatographic profile and the mass-spectrometric identity confirmation, and it ships with the order.

What vial sizes of BPC-157 & TB-500 “Wolverine” Blend are available?

BPC-157 & TB-500 “Wolverine” Blend is offered in 2 configurations: 10/10mg, 30/30mg. The larger sizes suit repeat runs that benefit from a single stock preparation, while smaller vials keep unused material in the stable lyophilised state for longer.

How much does BPC-157 & TB-500 “Wolverine” Blend cost?

Pricing runs from $145 to $305 per vial depending on the size selected, and the current price for each configuration is listed in the sizes and pricing table above. The certificate of analysis is included at no additional cost.

What is BPC-157 & TB-500 “Wolverine” Blend supplied as?

It is supplied as a lyophilised (freeze-dried) powder in a sealed glass vial. The dry format is the most stable way to ship and store a research peptide, and it keeps the material usable for longer than a pre-dissolved solution would.

How should BPC-157 & TB-500 “Wolverine” Blend be stored?

Keep the sealed vial frozen at -20 degrees Celsius, protected from light, until you are ready to use it. After reconstitution, store the solution at 2 to 8 degrees Celsius and use single-use aliquots to avoid repeated freeze-thaw cycling, which accelerates hydrolysis and aggregation.

What diluent should be used to reconstitute BPC-157 & TB-500 “Wolverine” Blend?

Bacteriostatic water is the usual choice; a preserved 0.9%% benzyl alcohol solution is a practical alternative when the same vial will be drawn from repeatedly. Add the diluent slowly down the vial wall, swirl gently and never vortex, because mechanical shear promotes aggregation. Divide the vial mass by the volume added to obtain your working concentration.

Is BPC-157 & TB-500 “Wolverine” Blend intended for human use?

No. This product is a research chemical supplied for in-vitro laboratory investigation only. It is not intended for human or veterinary use, and it is not a treatment, diagnostic or supplement.

How can I confirm the certificate of analysis for my batch?

The certificate of analysis is matched to the batch number printed on the vial and is included with the shipment. Compare the reported purity and identity data against the acceptance criteria in your protocol and file the document with your study records so the material remains traceable.

Related Research Peptides

The following compounds are commonly ordered alongside BPC-157 & TB-500 “Wolverine” Blend – either because they act on related pathways or because they belong to the same structural family.

• BPC-157 – synthetic pentadecapeptide (15 amino acids, gastric juice-derived sequence).
• TB-500 (Thymosin Beta-4) 10mg – synthetic 43-amino-acid actin-sequestering peptide (full-length thymosin beta-4).
• TB-500 & BPC-157 & KPV “Coremend” Blend – triple-peptide blend of TB-500, BPC-157 and KPV.
• Glow Blend (GHK-CU, BPC-157, TB-500) – three-peptide blend of GHK-Cu, BPC-157 and TB-500.

The complete research catalogue is available on the https://protidehealthlab.store/shop/ page. If you are unsure which vial size fits your protocol, order the smaller size first, confirm that the material meets your acceptance criteria against the certificate of analysis, and scale up once the preparation has performed as expected. Every listing shows the analytical documentation for the batch, so the material can be evaluated on evidence before it is ordered.

References and Further Reading

The links below point to publicly indexed literature and reference resources relevant to this compound class. They are provided so that the mechanistic summaries above can be traced to their sources. Access to full text depends on the subscription arrangements of your institution.

• Peer-reviewed literature indexed in PubMed (PMID 16418180)
• Peer-reviewed literature indexed in PubMed (PMID 8444844)
• PubMed – biomedical literature database maintained by the National Library of Medicine
• National Institutes of Health – public research and health information resources

Research Use Only Disclaimer

This product is sold strictly as a chemical reference material for in-vitro laboratory research and is not a drug, supplement, cosmetic or food. It must not be administered to humans or animals, must not be used for diagnostic or therapeutic purposes, and must be handled only by qualified personnel in an appropriate laboratory setting. Statements describing areas of scientific interest are summaries of published research literature and do not constitute claims of efficacy, safety or intended use. By purchasing, the buyer confirms that they are a qualified researcher and that the material will be used lawfully within an institutional or laboratory research context.